Reagent Barcode Confirmation window

Use this window to manually enter a barcode for a reagent bottle. After a reagent barcode is scanned the Reagent Barcode Confirmation window displays.

Note

The Reagent Barcode Information window displays for 20 seconds, then it automatically closes and proceeds with a liquid level sensor. To pause this action, select Timer Off and the window does not close, and no liquid level sensor is performed until you select OK. The display is adjustable using a system parameter.

The RTT1 button displays barcodes for RTT1.

The RTT2  button displays barcodes for RTT2.

NOTE

These buttons turn red if there is an error.

Using the window

1. Confirm or enter the correct barcode in the corresponding container position.

2. To save, select OK.

3. When prompted, select Yes.