Clearing methods

NOTE

Before using this function, make sure you want to completely remove a method from the system. Removed methods can not be recovered or restored by the system. You must re-enter all the information back into the system to restore methods.

Clearing a method

1. At the Analytical Parameters (Chemistry) window, select Clear.

2. At the Clear window, select All to clear all methods.

·   To clear a specific method, select Specif.no., then type its analytical condition number in the Analy.cond.no. box.

·   To clear a range of methods, type the range as shown here: 1 – 5.

3. Select OK and then select Yes when prompted.