IMA Settings window

Use this window to enter automatic limits for reagent baselines (RBL), sample measurement, and prozone formula values.

If these limits are fixed, the method cannot run properly, because of reagent variations. Therefore, a calibrator measurement is reset when the limits are reached.

Using the IMA Settings window

1. At the Analytical Parameters (Chemistry) window, select IMA setting.

2. At the IMA Settings window, enter the automatic limits for Blank (u), Blank (d), Sample (u), Sample (d), and Prozone val.

3. To define an automatic setting, set the Auto. set box to Do.

4. Select OK to save the settings and return to the Analytical Parameters (Chemistry) window.