Setting the System Monitor

1. At the Menu Panel, select Maint., then select System Monitor.

2. At the System Monitor window, enter or change the settings define below, as needed.

The settings you enter take effect immediately.

Verifying operating conditions

During-operation system settings

The RealTime Monitor field displays data in the following format.

1. In the On-line field, select Do or Not do.

2. In the ADVIA QC Transfer area, select Yes or No.

Pre-operation settings

note

You can change these options only before you initialize the system. After the system is initialized, the options are not available on the screen.

Specify if these system components are operational or cancelled:

Chemistry

ISE

Unused

Labo.Auto.Sys./Rack Handler

Clot Detection settings

1. In the Clot Detect area, select Avail. to use the clot detection feature or N.A. to disable it.

2. In the Clot sensitivity area, select Low, Middle, or High to select the sensitivity of the clot detection sensor.