At the Menu Panel, select Request then select Order Entry.
Select Entry Setup.
Perform any of the following tasks on this window:
Deselect the autoincrement mode
Determine how the cursor moves
Select the color for each sample status
Select Execute.
To automatically increment the Posi.no. and Samp.no. for each new workorder, select Yes.
To disable the autoincrement mode select No.
Select Samp.no. to have the cursor placed in the Samp.no. box for each new workorder.
Select Posi.no. + Samp.no. to have the cursor placed in the Posi.no. box for each new workorder.
Do not select Posi.no. at this time.
To limit cursor movement via the Tab key to Order no., Posi.no., Samp.no., and the Test Table, select Ordinary.
You can still use the mouse to place the cursor in the remaining boxes.
To extend cursor movement via the Tab key to the attribute boxes such as Sample Dilution Mode and Container, select Ordinary+Attrib.
Select the Setting button, then position the R (red), G (green), and B (blue) controls to create the selected color.
The default colors are as follows:
|
Status |
R |
G |
B |
|
Untested |
0 |
180 |
0 |
|
Rerun |
255 |
0 |
0 |
|
Tested |
0 |
0 |
255 |
When done, select Execute.