Use this window to monitor the amount of liquid in containers in the CTT sample tray.
At the Menu Panel, select Reagent, then select CTT Monitor.
On the CTT Monitor window, a horizontal bar graph for each of the 61 positions represents the remaining liquid in all CTT sample containers. The longer the green bar, the fuller the sample container. The volume of liquid remaining (in mL) is shown to the left of each graph.
To display information in the Identification area to the right of each graph and specific to that CTT position, you must enter your comments on the CTT Settings window as follows:
At the CTT Monitor window, select the CTT Set button.
The CTT Settings window opens.
Select the Cup/Tube Type.
Enter the Lot Name.
Enter the Lot No.
Enter the Exp.Date.
To navigate among the CTT positions shown in the window, use the Next and Prev buttons.
To display additional positions on the CTT Setting window, select the Next Page or Prev Page button.
Select Return to see your comments displayed in the Identification area next the CTT positions.
To display additional positions on the CTT Monitor window, select the Next Page or Prev Page button.
To print a summary of the information on the CTT Monitor window, select the CTT Summary button
When prompted, select OK.
Close the window.
On the CTT Monitor window, select Update.
At the CTT Monitor window, select the Clear.
When prompted, select OK.