JEOL Maintenance window

Use this window to perform testing of the tubing connections.

Testing tubing connections

Use this procedure to test tubing connections for leaks and incorrect connections.

Before you begin, make sure wash nozzles WUD and/or DWUD are removed from the system (place them on a plate so liquid is not spilled).

1. Log on as supervisor.

2. At the Menu Panel, select Maint. and then JEOL Maintenance.

3. In the Univers.sequence start area, enter the Sequence Number and Number of Times.

4. Select Start.

While the test is running, the operating mode is UNIVERSAL.

5. To close the window, select Exit.