Analysis Order Settings window

Use this window to set the order to run tests on the list.

Running tests in the order they display at the System Test List window, do not require this window.

·   The system test number, analytical condition number, and test item name display in the window.

·   The current processing order displays in the box on the right side of the window.

 Note on the processing order

Setting the processing order

  1. Open the System Test List window and select Analysis Order.

  2. In the Analysis order box, enter a number indicating the processing sequence, for the test items you want to sequence.

Make sure you type a unique number into each Analysis order box.

  1. Select OK.

  2. At the System Test List window, select Save.

NOTE

The processing order set here is not related to the sequence set in the Process Sequence window (that window determines the order in which tests display in other windows).

Removing order numbering

  1. At the Analysis Order Settings window, select Clear.

  2. At the Clear window, enter the item number you are deleting; or, select All to remove all sequencing.

  3. Select OK.

  4. Enter the appropriate test order in the Analysis order boxes.

  5. Select OK to save your changes and close the Analysis Order Settings window.

  6. At the System Test List window, select Save.