Print Form Settings window: selecting results data

Selecting the results data to print for each test item

1. From the View(V) menu at the Print Form Settings window, select Property(P).

2. Select Data Format.

3. To print each results data, select the check box for the results data item in the Data (D) list to enter the allowable width in mm for the results data item in the Width (W) box.

Example of data format

Note

Be sure the width is large enough to display the data as defined for temporary text.

1. In the Vertical (V) box, type the vertical offset in mm between the results data item and the top of the item cell. This value is usually 0.

2. In the Horizontal (H) box, type the horizontal offset in mm between the results data item and the left edge of the item cell.

3. In the Arrangement list, select the alignment of the results data item within the width space created in step 3b.

4. The temporary text for the results data item displays in every item cell for each report on the form page.

5. Verify that all of the temporary text is displayed, that the text is positioned within the item cell, and that it does not overlap another results data item.

6. Make any required adjustments.

4. Close the dialog box.