cautionUse this window to assign container types to each of the 84 positions in the STT sample tray. For the current analysis, you can override the settings in the Temp cup/tube select window.
Log on as supervisor.
At the Menu Panel, select Request, then select Cup/Tube Assign.
At the Cup/Tube Assign window, assign the containers as follows:
Select the arrow in the Status/Container field for a position.
From the list, select a container type to assign it to the position.
Container Types are defined in the System Specifications Settings window.
If you want to specify the container type in the workorder, keep the Status/Container set to 0:Priority requested (the other Status/Container values have priority over the workorder settings).
caution
The probes may get damaged if the container types are not set correctly.
As an option, you can select I for priority analysis of the sample at this position.
Repeat for other STT positions as needed.
To save the changes you made, select Save.
When prompted, select Yes.
To save your changes and close the window, select Exit.
When prompted, select Yes.