ISE Monitor window

Use this window for the following tasks:

· Monitor and verify calibration data as a function of time, using trace graphs.

· Print the results.

· Transfer calibration data to the ISE.

At the Menu Panel, select Maint., then select ISE Monitor.
Perform any of the following tasks on this window:

Monitor serum or urine calibrations	*Monitor selectivity check data
Monitor calibration history data	Print calibration data
Display data from past calibrations	Change y-axis scale
Delete calibration history data	Transfer data to the ISE

* Selectivity check must be performed by or under the supervision of authorized
Siemens service personnel. Please call your local technical support provider or distributor.

To close the window, select Exit.

ISE Parameters of Setting window

ISE Operation window