Setup Menu: ISE Parameter Settings window

Use this window to set the analysis parameters for ISE measurement of Na, Cl, and K electrolytes.

Entering ISE parameters

1. Log on as tech_manager.

2. At the Menu Panel, select Setup, then select ISE Parameter Settings.

3. Perform any of the following tasks on this window:

Enter settings for individual electrolytes (Na, Cl, and K)

Enter settings for all electrolytes

Check CTT settings

Check analysis parameters

4. To save the settings, close the window.

5. When prompted, select Yes.

6. To save settings without closing the window, select Save.

7. When prompted, select Yes.

8. To print ISE parameters, select Print, then when prompted, select Yes.

9. To reset ISE default values, select Clear, then when prompted, select Yes.