The system prints calibration, control, and patient sample results. Only patient and control sample results can be transmitted to a host computer.
Results are reported as samples finish analysis, or the operator can manually select results to report in batches.
· The During-operation system set area of the System Monitor window manages the printing of the sample results (usually for laboratory purposes).
· The Automatic transfer area of the Online Settings window manages the real-time transmission of the control and patient samples to a host computer.
· Use the Data Clean feature of the Online Settings window to prevent the transmission of questionable sample results. The Transfer Results List dialog box of the Review/Edit window indicates which samples failed this data check and were not transmitted.
Use the Review/Edit or Print Report windows to print selected patient results.
The Print Format Settings window can create up to ten report layouts.
Use the Review/Edit window to transmit selected patient results. The data clean feature is available to check the sample results for problems.