Ctrl/Cal Sample Setup window

Use this window to do the following:

·   Get or view measurement times, container types and comments for control and calibration samples. The settings are available in the Calibration Setup, QC Sample Definition, and ISE Parameter Settings windows for entering sample tray information.

·   Determine the tests set to run on a given position.

Using this window

  1. Log on as supervisor.

  2. At the Menu Panel, select Setup, then select Ctrl/Cal Sample Setup.

  3. At the Ctrl/Cal Sample Setup window, select the arrow in the box at the top left of the window.

  4. To display settings for the specified tray, select CTT, STT-98, or STT-99.

  5. The Usage column shows the purpose of each position number.

  6. Perform any of the following tasks at this window:

Set measurement times

View the tests to be run

Print settings

Clear settings

Set container type

 

To work with more position numbers, select Next page and Prev Page.

  1. To save changes, select Save.

  2. When prompted, select Yes.

  3. Close the window.